How Many Square Feet Will A Gallon Of Thompson Water Seal Cover?

How many square feet will a gallon of Thompson Water Seal cover? Approximate Coverage

Material Approximate Coverage (sq. ft./gal.)
Wood: Rough Sawn 100
Wood: Smooth Finish 200
Plywood 150
Wood Shingles 100

How much water seal do I need for deck?

On average most deck stains cover 150-300 sq. ft. per gallon depending on the age, condition, and porosity of the wood.

How long does Thompsons water Seal last in the can?

How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years.

How long before you can walk on Thompson's water Seal?

Now that you've applied Thompson's Water Seal following the instructions above, to your entire surface, you can walk away and let it dry for 24 hours. That's all the time you need to let Thompson's Water Seal work to protect your outdoor surfaces from water damage.

Can you apply Thompson's Water Seal?


Related faq for How Many Square Feet Will A Gallon Of Thompson Water Seal Cover?


Can you thin Thompson's Water Seal?

The old-timer came up with a similar formula in 3 parts linseed oil, 2 parts Thompson's Water Seal cut with 1 part paint thinner. The paint thinner acts as a penetrating agent, making the mixture thin enough so that the active ingredients penetrate the wood.


Why is my deck sticky after sealing?

"A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. Rinse thoroughly with a garden hose and spray nozzle, and let the wood dry. This removes any tackiness or residue."


Can you paint over Thompson Water Seal on concrete?

You can paint concrete that's been treated with Thompson's WaterSeal if you follow the proper steps. You should not paint over Thompson's WaterSeal Advanced Clear, however. Proper preparation of the concrete and adequate drying times are required before you can start painting.


How do you apply Thompson water Seal to pressure treated wood?


How long can you wait between coats of Ready Seal?

Apply two light coats to wood surface and allow at least 45 minutes between. 4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.


Do you need to wipe off Ready Seal?

If Ready Seal is to be used for interior use, it is recommended to provide proper ventilation during and after application. After application, we recommended wiping the entire surface that Ready Seal was applied to, with a clean rag dampened with Mineral Spirits to remove oil residue.


Was this post helpful?

Leave a Reply

Your email address will not be published.