How Do You Reset The Drum Light On A Brother Printer?

How do you reset the drum light on a Brother printer? To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.

How do you clear a brother drum error?

  • Make sure that the machine is turned on.
  • Open the front cover.
  • Press and hold OK for 2 seconds.
  • Press the Up arrow key or 1 to reset the drum counter.
  • Close the front cover.
  • How do you reset the toner cartridge and drum on a Brother printer HL 2321d?

  • Open the front cover and leave open while completing the following steps.
  • Turn the printer off.
  • Hold the 'go' button while turning the printer on.
  • After 3 seconds release the 'go' button.
  • (USER MODE) will appear.
  • Press the 'go' button NINE times.
  • How do you fix a Brother printer drum?

  • The corona wires have become dirty. Clean the corona wires in the drum unit.
  • The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
  • If the issue still continues, the drum unit is at the end of its life.
  • How do I reset my brother hl 2130 drum unit?

  • Make sure the machine is on, then open the front cover.
  • Press and hold the "Go" button for about 4 seconds or until all the LEDs light up.
  • Release the "Go" button and close the front cover.
  • If the drum light is off, the drum unit is reset.

  • Related advise for How Do You Reset The Drum Light On A Brother Printer?


    How do you reset the drum on a Brother printer HL 2140?

    Brother HL-2140 - Reset Drum

    Simply open the front cover, and hold the “GO” button until all four LED's are lit. Release the “GO” button and close the front cover.


    How do you reset the drum counter on a Brother MFC l3770cdw?


    How do I clean the drum on my Brother printer?

    Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.


    How do I get my Brother printer to recognize my new drum?

  • Make sure the machine is on.
  • Close up the front cover.
  • Hold down the “OK” button and the “up” arrow at the same time.
  • Press the “OK” button to select “Drum”.
  • Select the “down” button to reset the drum counter.

  • How do you reset the drum on a Brother HL 2240d?

    Brother HL-2240 - Reset Drum

    Simply open the front cover, and hold the “GO” button until all four LED's are lit. Release the “GO” button and close the front cover.


    How do I reset my brother toner cartridge?

  • Switch-off the printer.
  • Open the front cover.
  • Press and Hold the Go button while all the LEDs on the printer's control panel light-on.
  • Release the Go button.
  • Press Go twice.
  • Press Go 6 times if you want to reset Brother TN-2110 toner cartridge.

  • How do I reset my brother?


    What causes drum error on the Brother printer?

    The message "Drum Error" will appear on the display if the corona wire on the drum unit needs to be cleaned. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.


    How do I know if my printer drum is bad?

    The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.


    How do I reset my Brother HL 2132?

  • Turn off the printer.
  • Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  • Release GO, all the LEDs will turn off.
  • Press GO ten (10) times. The printer will automatically restart.

  • How do you clean the drum on a Brother HL 2130?

  • Prepare blank A4 or Letter size paper.
  • Make sure the machine is in the Ready mode.
  • Open the front cover and the back cover (face-up output tray).
  • Press the Go button five times.
  • Close the front cover.
  • Open the manual feed slot cover.

  • How do I reset my Brother HL 2240 toner?


    How do I reset my Brother MFC l2710dw drum?

  • Make sure the machine is turned on.
  • Close the front cover.
  • Press OK and the Up arrow key at the same time.
  • Press OK to select Drum.
  • Press the Up arrow key to reset the drum counter.

  • How do you reset the drum counter on a Brother MFC 9330cdw?

  • Press Cancel to interrupt the error.
  • Press Settings.
  • Press All Settings.
  • Swipe up or down or press the Up or Down arrow key to display Machine Info.
  • Press Machine Info.
  • Press Parts Life.

  • How do you reset the drum on a Brother MFC L3750CDW?

  • Make sure the machine is turned on.
  • Press and hold for about five seconds.
  • Press [Drum].
  • Select the toner color for the drum unit you just replaced.
  • Press [Yes].

  • Can printer drums be cleaned?

    After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.


    How do you know when your printer drum needs to be replaced?

    As a general rule, you should always replace your drum unit after using three to four toner cartridges just to be safe. Page yields are also calculated, with only 5% of the page being filled as an entire page. Depending on your usage, you may need to change your drum unit faster than before.


    How do you change the drum on a Brother printer?

  • Make sure that the machine is turned on.
  • Open the front cover.
  • Take out the drum unit and toner cartridge assembly.
  • Push down the green lock lever and take the toner cartridge out of the drum unit.
  • Unpack the new drum unit.
  • Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

  • Why does my printer keep saying replace drum?

    Without a chip, your drum unit has no way of being able to associate itself with your Brother printer. As a result, you will get the “Replace Drum” message because your printer thinks that you've not installed a drum unit. On the right is a standard toner cartridge with a chip.


    How do you reset the drum on a Brother printer HL 2270dw?


    How do I bypass the toner light on a Brother printer?

  • Power on the Brother printer.
  • Open the toner access door located at the front of the printer.
  • Press the "Clear/Back" button.
  • Scroll through the list of toner cartridges until you have located the one that is giving the "Replace Toner" message.
  • Press the "1" button to reset the toner cartridge display.

  • How do I bypass brother low toner?

  • Open the front cover of the printer.
  • Press the Clear / Back button.
  • Press the * button.
  • Press the 0 button.
  • Press the 0 button.
  • Close the front cover.
  • This will clear the 'Toner Low' error and allow for continuous printing.

  • How do I reset my Brother HL L2305W?

    Brother HL-L2305W Toner reset Procedure

    Hold the 'GO' button down while turning the printer on. After 3 seconds release the 'GO' button. "USER MODE" will appear. Press the "GO" button NINE times.


    How do I reset my Brother HL l2340dw?

  • Press ▲ or ▼ to select Reset Menu. Press OK.
  • Press ▲ and Back at the same time.
  • Press OK when Settings Reset appears.
  • Press OK when Restart Printer? appears. Your machine's printer settings will be reset.

  • Was this post helpful?

    Leave a Reply

    Your email address will not be published.