How Do I Get My Brother Printer To Recognize My New Drum?

How do I get my Brother printer to recognize my new drum?

  • Make sure the machine is on.
  • Close up the front cover.
  • Hold down the “OK” button and the “up” arrow at the same time.
  • Press the “OK” button to select “Drum”.
  • Select the “down” button to reset the drum counter.
  • Why does my Brother printer keep telling me to replace the drum?

    The Brother machine will display a 'Replace Drum' or 'Drum Stop' message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

    How do you reset a drum counter?

    How do you reset the drum on a Brother HL l2370dw?

  • Make sure the machine is turned on.
  • Close the front cover.
  • Press OK and the Up arrow key at the same time.
  • Press OK to select Drum.
  • Press the Down arrow key to reset the drum counter.
  • How do you reset the drum on a Brother printer mfc 7360N?

    BROTHER MFC-7360N/MFC-7362N

    Open the machines front door where you would replace the cartridges. On the top panel you will see a "clear/back" button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.


    Related advise for How Do I Get My Brother Printer To Recognize My New Drum?


    How do I reset my Brother printer?

    Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.


    How long should a drum last on a Brother printer?

    The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.


    What happens if you don't replace the drum in a printer?

    A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won't break your printer, it will just fail to stop printing at a certain point.


    How do I reset my Brother printer counter?

    Open the front cover of the printer (to access cartridges). With the front cover open, simultaneously press the Secure and Cancel buttons. The reset menu will now appear on the LCD display. Scroll through the menu to select a color and yield to reset.


    How do you reset the drum on a Brother printer HL l5100dn?

    Make sure the machine is turned on. Open the front cover. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK. Press for [Reset] to reset the drum counter.


    How do you reset the drum on a Brother printer HL 2240?

    Brother HL-2240 - Reset Drum

    Simply open the front cover, and hold the “GO” button until all four LED's are lit. Release the “GO” button and close the front cover.


    How do you reset the drum counter on a Brother HL l2360dw?

  • Open the front cover.
  • Press and hold the “OK” button for 2 seconds to display the “Drum Unit” option, then press “OK”.
  • Press the "up" arrow button to reset the counter.

  • How do you reset the drum counter on a Brother HL 2280DW?

  • Turn on the printer and replace the drum. Keep the front door open.
  • Press the Clear button.
  • Press the Arrow Up button.
  • When the screen says Accepted, close the front door.
  • The drum unit is reset.

  • How do I reset my Brother HL L2375DW?

  • Press the Up or Down arrow key to choose General Setup, and then press OK.
  • Press the Up or Down arrow key to choose Replace Toner, and then press OK.
  • Press the Up or Down arrow key to choose Continue or Stop.
  • Press Go.

  • How do you reset the drum life on a Brother MFC 7340?

  • With your printer ON, open the front door (cover)
  • Press Clear/Back Button once.
  • Press *00 (*zero zero)
  • The message on the display should now read Accepted.
  • Close the front cover.
  • Your toner is now reset.

  • How do you change the drum on a brother mfc 7360n?

  • Turn on the printer.
  • Open the front cover and let the printer sit for ten minutes so it can cool down.
  • Remove the drum unit and toner cartridge from the printer.
  • Separate the toner cartridge from the drum unit by pressing down on the green lever.
  • Open up your new drum unit.

  • How do you reset the toner on a Brother printer MFC?


    Where is the reset button on a Brother printer?

    [Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].


    How do I reset my Brother HL l2320d printer?


    How do I clear the memory on my Brother printer?

  • Press MENU or MENU/SET and choose Fax => Remote Fax Opt => Fwd/Page/Store or Forward/Store.
  • Press the UP OR DOWN ARROW key to choose Off.
  • Press the OK or MENU/SET key.
  • Press 1.
  • Press the STOP/EXIT key.

  • Can you clean a printer drum?

    Look for chunks of toner on the drum unit. After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.


    What happens when printer drum goes bad?

    What happens when a printer drum goes bad? When the drum wears out, you'll begin seeing lines or faults repeated across the page. Replace the drum unit when you get white lines on your pages.


    What are the signs that a printer drum needs to be replaced?

    The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.


    What does drum light mean on Brother printer?

    The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.


    Is toner and drum the same thing?

    In short, the toner cartridge is a container that contains the toner powder, whereas the drum unit is an electrically charged cylinder that transfers the powder onto paper.


    How can I extend my brother drum life?

    You can extend the drum life and keep it clean by occasionally cleaning the corona wire. You can simply do this by sliding the little plastic piece attached to the corona wire back and forth a couple of times. After you replace your drum, don't forget to reset it.


    How do I reset my Brother HL L2300D?

  • Press and Hold the Power button until the machine turns off.
  • Open the Toner Door.
  • Press and Hold the Go button until step 5.
  • Press the Power button.
  • Release the Go button when the Toner, Paper, and Drum lights are lit.
  • Press the Go button 9 times.

  • Why won't my Brother printer recognize the toner cartridge?

    Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!


    How do I reset my brother tn 420 toner?

    Press the “Go” button 2 times – The “Toner, Drum, and Error” LEDs will turn ON. Press the “Go” button 6 times for a TN420 or Press the “Go” button 7 times for Brother TN450. Close the front cover after “Error” LED starts to flash. Finally, The reset procedure has been completed.


    How do you reset the drum on a Brother printer HL 6180dw?

  • For the models with LCD: Hold down Go until the Drum Clear message is displayed on LCD, then release Go.
  • For the models without LCD: Press and hold down Go for about 4 seconds until all the LEDs light up. Once all six LEDs are lit, release Go.

  • How do I change the drum on my Brother printer?

  • Make sure that the machine is turned on.
  • Open the front cover.
  • Take out the drum unit and toner cartridge assembly.
  • Push down the green lock lever and take the toner cartridge out of the drum unit.
  • Unpack the new drum unit.
  • Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

  • How do I reset my brother hl 2250dn printer?

  • Turn off the printer.
  • Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  • Release GO, all the LEDs will turn off.
  • Press GO ten (10) times. The printer will automatically restart.

  • Was this post helpful?

    Leave a Reply

    Your email address will not be published.