Can I Pour Hydrogen Peroxide In My Well?

Can I pour hydrogen peroxide in my well? From time to time, it may be desirable to use hydrogen peroxide to decontaminate the entire well because some of the odor-causing bacteria also produce sulfuric acid, which will corrode the pump in the long run. Some of the iron bacteria can also produce a musty, fishy or oily smell in the water.

How much hydrogen peroxide do you put in your well?

Anyway, the concentration we recommend is 7%. (Click here if you want to read more about Eliminate Odors and Freshen Well Water with Hydrogen Peroxide.)

What can I use to shock my well?

Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

How do you shock a well naturally?

Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well. When chlorine is added to water the pH level will rise. Food grade white vinegar is used to lower the water's pH level so the chlorine will work effectively.

Should you pour bleach down your well?

Do not use bleach with a "fresh scent," lemon fragrance, or other cleaners added. One gallon of bleach will treat up to an 8-inch diameter well containing 100 feet of water. If your well is much larger, or if your distribution system is unusually large, expect to use more than 1 gallon of bleach.


Related advise for Can I Pour Hydrogen Peroxide In My Well?


How do you remove sulfur from well water?

Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months. 2. Chlorinator: Install a chlorine injector system (chlorinator) on your wellhead for continuous injection of chlorine when the water is running.


Should I put chlorine in my well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. Chlorinating your well, also known as shock chlorination, kills bacteria and disease-causing organisms that can enter your well.


How much bleach is needed to shock a well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach - (4 quarts in a gallon). Do not use excessive amounts of bleach - more is not more effective.


How much bleach should I dump in my well?

Checking the math: Using a standard of 3 US Cups of Bleach / 100' of 6" well casing = 0.02 cups per foot where 1 foot of 6" casing is about 1.5 gallons, so 0.02 Cups / 1.5 gallons, or 0.013 cups/gallon - that's a concentration of (0.013cups x 8 oz/cup) or 0.1 liquid ounce of bleach per gallon or 1 ounce of bleach for


Is it safe to shock a well?

Although shock chlorination will sanitize wells, it may temporarily increase the arsenic levels of water in areas where aquifer sediments contain high levels of arsenic (WDNR, 2008).


How do you flush a well?


Will bleach hurt a well pump?

Disinfecting with a strong chlorine solution can dislodge this scale and plug or damage your pump, and/or cause problems elsewhere in the plumbing system.


Can you shock a well with vinegar?

Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well. When chlorine is added to water the pH level will rise. Food grade white vinegar is used to lower the water's pH level so the chlorine will work effectively.


How do you treat smelly well water?

  • Aerate water and/or inject air or oxygen.
  • Chlorinate well water to eliminate both sulfur and bacteria.
  • Use ozone gas in a closed tank or atmospheric tank.
  • Inject hydrogen peroxide.

  • Can I water plants with hydrogen peroxide?

    Hydrogen peroxide helps encourage healthy root growth because of the extra oxygen molecule. Oxygen can help plant roots absorb nutrients from the soil. For plants with root rot or fungal infections, use 1 tablespoon (15 ml.) per cup of water.


    Can you put pool shock in your well?

    Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well. Don't use stabilized swimming pool chlorine products or non-chlorinated “pool shock” products, as they are not effective enough to clean your drinking water.


    How much does it cost to shock a well?

    How much does it cost to shock a well? If you hire a company to do it, it can cost anywhere around $100 depending on where you live. Doing it yourself will only cost as much as the chlorine, 10 gallon bucket and the safety supplies to do it.


    How do you flush sediment out of a well?


    Do water filters remove sulfur?

    Regardless of the source of the odors, installing whole house water filters that will remove hydrogen sulfide and kill sulfur bacteria is a good solution to consider if you want to reduce bad smells, and protect your family from other chemical and microbial contaminants. Take Back Your Water and Just Breathe!


    What causes rotten egg smell in hot water?

    Although there are several reasons why you have rotten egg smell in your hot water, the most common cause is the sulfur bacteria (SRB) in the hot water tank. They feed on sulfur and produce hydrogen sulfide gas as waste. When the gas dissolves in the water, it gives it that characteristic odor of spoiled eggs.


    How do I keep my well from going dry?

  • Is there a leak? Eliminate unnecessary water use by confirming that your home's water lines are leak-free.
  • Fix running toilets and leaky faucets. A leaky faucet probably won't make your well run dry, but it does add to well water exhaustion.
  • Schedule Use.

  • How do you super chlorinate a well?


    How long should you flush a new well?

    To get the sediment out of a well it should be pumped for at least 48 hours straight, at a rate greater than the maximum pumping rate expected when the system is operating normally. Throughout the heavy pumping, the pressure gauge on your cold water tank should read 20 psi or less.


    How much bleach does it take to purify 300 gallons of water?

    A general rule of thumb to shock chlorinate and disinfect a storage tank is to mix non-scented NSF-approved household bleach (5.25% chlorine) in the reservoir at the ratio of 1 gallon of bleach for every 1,000 gallons of water (i.e., 1 quart for every 250 gallons of water).


    Will shocking a well get rid of coliform?

    When done properly, shock chlorination will kill all the bacteria existing in a well. A recent Penn State study of wells contaminated by coliform bacteria found that shock chlorination and installation of a sanitary well cap successfully removed the bacteria for one year in 15 percent of the wells.


    How long does it take to flush chlorine from well?

    Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution.


    How do I know if I need to shock my well?

  • Slime Growth. Though it might not be the first thing you notice, something to look out for is a slime substance which grows on the inside of your toilet tank.
  • Laundry Staining.
  • Blocked Pipes.
  • Foul Odor.

  • When should I shock my well?

    Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.


    Was this post helpful?

    Leave a Reply

    Your email address will not be published.